Pomona
(R)
Model 4276-C-# BNC Male Right Angle Both Ends
FEATURES: This cable assembly is similar to our model 2249-C except with right angle connectors. It is designed to access those BNC connectors in tight locations such as found in the back of rack mounted equipment. The right angle connectors are impedance matched to provide the best signal quality. These cables are made of the highest quality materials and assembly procedures. MATERIALS: BNC: Body: Brass, tarnish resistant plating Center Contacts: Brass, gold plating Strain Relief: PVC, molded onto cable and connector Cable: RG58C/U, 50 Ohm, .195 OD RATINGS: Voltage:Shield/Earth: 30VAC/60VDC Max. Inner Conductor/Shield: 500VRMSMax. Operating Temperature: +50 C (+122 F) Nominal Impedance: 50 Ohms ORDERING INFORMATION: Model 4276-C-XX XX = Cable length in inches Std. Lengths: 12 (30,5 cm), 24 (61 cm), 36 (91.44 cm) Additional lengths can be quoted upon request. Ordering Example: 4276-C-36 is a cable with a length of 36
All dimensions are in inches. Tolerances (except noted): .xx = .02 (,51 mm), .xxx = .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA
6/9/99 SY/EH/LS W:\pomona\grponly\Datasheet Updates\Updates 2005\d4276_1_02.doc
More drawings available at www.pomonaelectronics.com
Page 1 of 1
|
